AMC iLive X2 Specifikace

Procházejte online nebo si stáhněte Specifikace pro Mikrofony AMC iLive X2. AMC iLive X2 Specifications Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 2

8. For the System Locking Control press the SET button for several times until you will see the LCD screen as in picture 3. After 2 -3 seconds the

Strany 3

Body Pack Transmitter setup 1. Before starting, please open the battery cover and insert 2AA alkaline batteries. 2. Slide the transmitter ON/OFF s

Strany 4 - All system includes:

Operation 1. Please choose non-intermodulation frequency setting. Usually 4 transmitters can be used at the same time within 25MHz bandwidth. If mo

Strany 5

Troubleshooting Problem Solution No indication on receiver Make sure AC adapter is securely plugged into electrical outlet and in to DC input conn

Strany 6

Handheld transmitter 1. Open the battery cover 2. Insert the 2*AA Alkaline battery 3. Close the battery cover

Strany 7

Body Pack Transmitter 1. Open the battery cover 2. Insert the 2*1,5V AA Alkaline battery 3. Close the battery cover Battery cover

Strany 8

Receiver’s specifications: Carrier frequency range: 795 MHz - 820 MHz Modulation: FM Adjustable range: 25 MHz Channels: 100 Channel spac

Strany 9 - Picture 1 Picture 2

iLive X2 – one of the latest wireless microphones systems of the AMC iLive series. This system is created for active musicians and presen

Strany 10 - Picture 3

Product Introduction The iLive X2 dual wireless microphone system is adopted by UHF frequency transmission. This system is controlle

Strany 11

System components All system includes:  Receiver ...

Strany 12

Rear panel     DC power socket  Output A squelch level control     Microphone A audio output  Mixed audio output     Micr

Strany 13

Handheld transmitter  Sound inlet basket  LCD display  IR port : receives infrared beam to synchronize frequencies  Power on /off

Strany 14

Body Pack Transmitter  Microphone Input Jack  On-Off switch  Low battery indicator: When the power is switched "ON", indicator blink

Strany 15 - Body Pack Transmitter

Body Pack Transmitter’s LCD instruction  LCD display showing the channel number  Battery level indicator Lavalier microphone  Microphone

Strany 16

Receiver setup 1. Before turning on the receiver, please turn off the transmitters and turn the receiver’s volume knobs down to the

Komentáře k této Příručce

Žádné komentáře